Categories
Recent Posts
Recent Comments
- Dave2084 on An easy to build programmer for 2704 / 2708 / TMS2716 / MCM68764 / MCM68766 EPROMs
- Claus on An easy to build MCS-48 (8748 / 8749 / 8741 / 8742 / 8048 / 8049 / 8050 / 8755) Programmer / Reader
- Colin on BPROM (Bipolar PROM) / PAL Programming (service)
- Vincent on DuPont and “DuPont” connectors, and how to crimp them properly
- Vincent on A new budget “DuPont” crimp tool is bought to my attention
Archives
- May 2024
- October 2023
- July 2023
- May 2023
- April 2023
- March 2023
- January 2023
- December 2022
- November 2022
- October 2022
- September 2022
- August 2022
- July 2022
- June 2022
- May 2022
- April 2022
- February 2022
- January 2022
- December 2021
- October 2021
- September 2021
- April 2021
- March 2021
- January 2021
- December 2020
- November 2020
- October 2020
- September 2020
- August 2020
- July 2020
- June 2020
- May 2020
- April 2020
- March 2020
- February 2020
- January 2020
- December 2019
- July 2019
- June 2019
- May 2019
- February 2019
- January 2019
- June 2018
- May 2018
- April 2018
- September 2017
- August 2017
- June 2017
- May 2017
- January 2017
- August 2016
- May 2016
- November 2015
- October 2015
- September 2015
- June 2015
- April 2015
- March 2015
- February 2015
- November 2014
- June 2014
- May 2014
- April 2014
Hi Matt, Have you been able to successfully view console debug output ?
i found PCB800099 SCH
Hi matt, I am workin on source code for pcb800099, I managed to get image on my lcd screen but I can not find how to enable the ACC PIN for reverse camera , I suppose I need a piece of code which wills check the pin if HIGH or LOW and if it is LOW set the input source to AV2, but I could not find the pin number and how to read it on code basis